Everlast 12" Dia 100-Tooth 1" Bore .095" Plate 0.062" Thin Rim Plate 0.091" Kerf Thin Rim Saw – Triple Chip

Thank you for shopping with us!

The perfect saw to use where there is a need for a minimum of stock removal per cut, as in the cutting of plastic or veneer strips for edge banding. Maximum depth of cut on Thin Rim blade is 1-3/4 inches.

Alternate design with thin saw plate and thick support hubs on both sides is available.

Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.