Item # TK35072T1, Everlast Astra Series 350mm Dia 72-Tooth 1" Bore 2.5mm Plate 3.5mm Kerf Panel Saw (Metric Diameter MICRO-5 Tip)
$198.81
Download as PDF
Thank you for shopping with us!
Thin kerf blades create less power drain on machine and allow for minimum of stock waste. Please note triple chip grind recommended for cutting all types of abrasive materials.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
Thin kerf blades create less power drain on machine and allow for minimum of stock waste. Please note triple chip grind recommended for cutting all types of abrasive materials.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1 in |
| Diameter | 350 mm |
| Grind | TCG |
| Kerf | 0.138 in |
| Plate | 0.095 in |
| Teeth | 72 |
| Hook Angle | 13 deg |