Item # TK1080A, Everlast 10" Dia 80-Tooth 5/8" Bore 0.072" Plate 0.102" Thin Kerf Saw - Alternate Top Bevel
$142.69
Download as PDF
Thank you for shopping with us!
Thin kerf blades create less power drain on machine and allow for minimum of stock waste.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance crosscutting.
Thin kerf blades create less power drain on machine and allow for minimum of stock waste.
Alternate Top Bevel - ATB - Each tooth has top bevel typically between 10 and 20 degrees. Two teeth are required to provide a full kerf cut. Provides low cutting pressures, which reduce material tearing during the cutting process and provides a fine cutting finish. Best performance crosscutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 5/8 in |
| Diameter | 10 in |
| Grind | ATB |
| Hook Angle | 5 deg |
| Kerf | 0.102 in / 2.6 mm |
| Plate | 0.072 in / 1.8 mm |
| Teeth | 80 |