Item # TCMK2060, Everlast Truss & Component Saw - 20" Dia 60-Tooth 1.125" Bore 0.150 Plate 0.200" Kerf
$479.39
Download as PDF
Thank you for shopping with us!
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1.125 in |
| Diameter | 20 in |
| Countersink | 3-Left; 3-Right |
| Kerf | 0.200 in - 5.1 mm |
| Machine | Mitek |
| Grind | TCG |
| Plate | 0.150 in - 3.8 mm |
| Teeth | 60 |
| Hole Size | 4.00" Bolt Hole Circle Dia |