Item # GP940T, Everlast 9" Dia 40-Tooth 5/8" Bore 0.087" Plate 0.125" Kerf General Purpose Cut-Off Saw - TCG
$107.94
Download as PDF
Thank you for shopping with us!
Designed for all around general purpose cutting in solid woods, plywood, masonite, chip core, and laminated formica (single sided). Please note triple chip grind recommended for cutting all types of abrasive materials, such as chip board or high pressure laminates.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
Designed for all around general purpose cutting in solid woods, plywood, masonite, chip core, and laminated formica (single sided). Please note triple chip grind recommended for cutting all types of abrasive materials, such as chip board or high pressure laminates.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 9 in |
| Bore | 5/8 in |
| Grind | TCG |
| Kerf | 0.125 in (3.2 mm) |
| Plate | 0.087 in - 2.2 mm |
| Teeth | 40 |