Item # DFV860, Everlast 8" Dia 60-Tooth 5/8" Bore .087" Plate 0.115" Kerf Double Face Veneer Saw - Alternate with Raker
$137.96
Download as PDF
Thank you for shopping with us!
A saw specifically recommended for the cutting of double-sided veneered panels either with or against the grain. Splinter-free cuts in plywood. Also for cutting of veneer or hardwood strips for edge banding. Alternate with Raker - AR - Similar configuration to ATB but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
A saw specifically recommended for the cutting of double-sided veneered panels either with or against the grain. Splinter-free cuts in plywood. Also for cutting of veneer or hardwood strips for edge banding. Alternate with Raker - AR - Similar configuration to ATB but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 8 in |
| Bore | 5/8 in |
| Grind | AR |
| Kerf | 0.115 in |
| Plate | 0.087 in |
| Teeth | 60 |
| Hook Angle | -5 deg |