Item # ASMT128058, Everlast Astra Series 12" Dia 80-Tooth 5/8" Bore 0.095" Plate 0.115" Kerf Mitre Saw - Wood
$275.16
Download as PDF
Thank you for shopping with us!
For the smoothest cutting of wood or aluminum mouldings. Extra stiff plates and special clearances provide extremely accurate cuts on double mitre machines such as Pistorius, Sampson, CTD, etc. Extra hard MICRO -5 tips used. MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide. Alternate with Raker - AR - Similar configuration to ATB but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
For the smoothest cutting of wood or aluminum mouldings. Extra stiff plates and special clearances provide extremely accurate cuts on double mitre machines such as Pistorius, Sampson, CTD, etc. Extra hard MICRO -5 tips used. MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide. Alternate with Raker - AR - Similar configuration to ATB but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 12 in |
| Bore | 5/8 in |
| Grind | AR |
| Kerf | 0.115 in (2.9 mm) |
| Plate | 0.095 in - 2.4 mm |
| Teeth | 80 |