Item # 684004, Amana Tool Carbide-Tipped Combination Ripping and Crosscut 8 Inch Dia x 40T 4+1, 15 Deg, 5/8 Bore
$102.86
Download as PDF
Thank you for shopping with us!
Where one blade must do almost everything – ripping and crosscutting hardwood and softwood, cutting plywood – this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved chip ejection.
Where one blade must do almost everything – ripping and crosscutting hardwood and softwood, cutting plywood – this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved chip ejection.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 8 in |
| Bore | 5/8 in |
| Grind | 4 & 1 |
| Hook Angle | 15 deg |
| Kerf | .126 in |
| Plate | .087 in |
| Teeth | 40 |
You may also like…
-
Item #716801, Amana Tool Carbide-Tipped Cut-Off & Crosscut 16 Inch Dia x 80T TCG, 10 Deg, 1 Inch Bore
$284.78
-
Item #610801C, Amana Tool Electro-Blu™ Carbide-Tipped Fine Cut-Off and Crosscut 10 Inch Dia x 80T TCG, 10 Deg, 5/8 Bore, Non-Stick Coated
$113.86
-
Item #712960, Amana Tool Carbide-Tipped Heavy Duty Cut-Off & Crosscut 12 Inch Dia x 96T ATB, 10 Deg, 1 Inch Bore
$236.40
-
Item #684800, Amana Tool Carbide-Tipped Cut-Off & Crosscut 8 Inch Dia x 48T ATB, 10 Deg, 5/8 Bore
$110.36