Item # 55391, Amana Tool 45° Lock Miter Carbide-Tipped 1 5/8" D x 5/8" CH x 1/4" Shk 2-Flute
$68.33
Download as PDF
Thank you for shopping with us!
The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and fed across the cutter. For best results, use in a table-mounted router. Full color instruction manual included.
The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and fed across the cutter. For best results, use in a table-mounted router. Full color instruction manual included.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 5/8 in |
| Diameter (D1) | 13.2mm |
| Cut Height, Length, or Width | 5/8 in |
| Flute | 2 |
| Overall Length | 1 3/4 in |
| Shank | 1/4 in |
| Angle | 45 deg |