Item # 55312, Amana Tool Carbide-Tipped 45° Miter Joint Under-Cut Assembly 4-Wing w/ " Ultra-Glide™" Ball Bearing Assembly 1 3/8" Dia x 1/4" x 1/4" Shank
$61.16
Download as PDF
Thank you for shopping with us!
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer.
A - Laminated top is " undercut"
B - Apron laminate is pre-cut at 45°
C - Adhere pre-cut laminate for a perfect fit. A fine file may be used to remove the sharp edge after joining
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 3/8 in |
| Cut Height, Length, or Width | 1/4 in |
| Replacement Parts | 1/4 in shank arbor 47600, 45 deg cutter only 55310, nut 67088 |
| Bearing(s) | Ultra-Glide Bearing 47727 |
| Note | Not for use in a laminate trimmer |
| Overall Length | 2 3/8 in |
| Shank | 1/4 in |
| Wings | 4-Wing with Ultra-Glide Ball Bearing Assembly |
| Angle | 45 deg |
