Item # 54412, Amana Tool Carbide-Tipped Reversible Crown Molding 3/8" x 7/8" x 7/16" Radius x 1-1/4" Dia x 2-7/16" x 1/2" Shank
$89.21
Download as PDF
Thank you for shopping with us!
Give your ceilings that finished look!
With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Bevel back edges, cutting off 45° excess with one of our chamfer bits.
Can be used with other crown molding bits to create many different combinations!
Give your ceilings that finished look!
With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Bevel back edges, cutting off 45° excess with one of our chamfer bits.
Can be used with other crown molding bits to create many different combinations!
| SPECIFICATIONS | |
| Diameter | 1 1/4 in |
|---|---|
| Cut Height, Length, or Width | 2 7/16 in |
| Flute | 2 |
| Manufacturer | Amana Tool |
| Note | Can be used with other crown molding bits to create many different combinations! |
| Overall Length | 4 1/16 in |
| Radius | 3/8 in |
| R1/Radius | 7/8 in |
| R2/Radius | 7/16 in |
| Shank | 1/2 in |
