Item # 54221, Amana Tool Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 Radius x 3-3/8 Dia x 1/2 Inch Shank
$198.75
Download as PDF
Thank you for shopping with us!
Amana Tool Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 Radius x 3-3/8 Dia x 1/2 Inch Shank
Raised panels fit standard panel grooves, even when the panel thickness exceeds 5/8" . As the main cutter raises the front of the panel, the back cutter mills the back to produce a standard-thickness tongue around the panel. Each tool is supplied with two different guide bearings, enabling you to stage cuts on curved edges effectively and safely. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Multiple passes recommended.
Replacement bearing #47713 (8mm x 16mm) and #47763 (8mm x 1 1/4" )
Warning: Maximum RPM = 12,000
Profile Sample #54221
Note: Reveal ('A') reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame. Note: To receive ('A1') use bearing #47763.
Amana Tool Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 Radius x 3-3/8 Dia x 1/2 Inch Shank
Raised panels fit standard panel grooves, even when the panel thickness exceeds 5/8" . As the main cutter raises the front of the panel, the back cutter mills the back to produce a standard-thickness tongue around the panel. Each tool is supplied with two different guide bearings, enabling you to stage cuts on curved edges effectively and safely. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Multiple passes recommended.
Replacement bearing #47713 (8mm x 16mm) and #47763 (8mm x 1 1/4" )
Warning: Maximum RPM = 12,000
Profile Sample #54221
Note: Reveal ('A') reflects the total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame. Note: To receive ('A1') use bearing #47763.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 3 3/8 in |
| Cut Height, Length, or Width | 1 1/16 in |
| Bearing(s) | 47763, Amana Tool 5/16 ID x 1-1/4 OD x .196 Thick Steel Ball Bearing Guide|47713, Amana Tool Metric 8mm ID x 16mm OD x 5mm Thick Steel Ball Bearing Guide |
| Diameter (D1) | 2 1/8 in |
| Flute | 2 w/Bearing |
| Note | Reveal A reflects the total length of cut. Therefore, you must deduct 3/8 in (usually) to allow the panel to recess into the frame. To Receive 'A1,' use bearing #47713. Bearing is included with tool. |
| Overall Length | 3 1/16 in |
| Radius | 7/8 in |
| Reveal | 1 3/8 in (A)1 1/16 (A1) |
| Shank | 1/2 in |
| Type | Ogee |
| Angle | N/A |
| RPM | Max 12,000 |
