Item # 54119, Amana Tool Carbide-Tipped Cove Raised Panel 1-9/16 Radius x 1 7/16 Angle x 3-3/8 Dia x 1/2 x 1/2 Inch Shank
$130.95
Download as PDF
Thank you for shopping with us!
Amana Tool Carbide-Tipped Cove Raised Panel 1-9/16 Radius x 1 7/16 Angle x 3-3/8 Dia x 1/2 x 1/2 Inch Shank
Create raised panels for cabinet doors, frame and panel furniture, and architectural paneling with a raised panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended.
Replacement bearing #47706
Warning: Maximum RPM = 14,000
*Reveal 'A' reflects the total length of cut. Therefore, you must deduct 3/8" (usually) to allow the panel to recess into the frame.
Amana Tool Carbide-Tipped Cove Raised Panel 1-9/16 Radius x 1 7/16 Angle x 3-3/8 Dia x 1/2 x 1/2 Inch Shank
Create raised panels for cabinet doors, frame and panel furniture, and architectural paneling with a raised panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended.
Replacement bearing #47706
Warning: Maximum RPM = 14,000
*Reveal 'A' reflects the total length of cut. Therefore, you must deduct 3/8" (usually) to allow the panel to recess into the frame.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 3 3/8 in |
| Bearing(s) | 47706, Amana Tool 3/16 ID x 1/2 OD x .195 Thick Steel Ball Bearing Guide |
| Cut Height, Length, or Width | 1/2 in |
| Flute | 2 w/Bearing |
| Note | Reveal 'A' reflects the total length of cut. Therefore, you must deduct 3/8 in (usually) to allow the panel to recess into the frame. |
| Overall Length | 2 3/8 in |
| Radius | 1 9/16 in |
| R1/Radius | -- |
| Reveal | 1 7/16 in |
| R2/Radius | -- |
| Shank | 1/2 in |
| Type | Cove |
| Angle | -- |
| RPM | Max 14,000 |