Item # 49696, Amana Tool Carbide-Tipped Plunging Round Over 3/16 Radius x 5/8 Dia x 5/16 x 1/4 Inch Shank
$34.69
Download as PDF
Thank you for shopping with us!
This bit creates a flat-bottom groove between two quarter-round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending on the cut depth adjustment, the radii can be flush with the work surface, an edge guide, or on the router table using a fence.
This bit creates a flat-bottom groove between two quarter-round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending on the cut depth adjustment, the radii can be flush with the work surface, an edge guide, or on the router table using a fence.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| B1 | 1/8 in |
| Diameter | 5/8 in |
| Cut Height, Length, or Width | 5/16 in |
| Diameter (D1) | 1/4 in |
| Flute | 2 |
| Note | -- |
| Overall Length | 1 3/4 in |
| Radius | 3/16 in |
| Shank | 1/4 in |
| RPM | -- |
