Item # 49560, Amana Tool Hand/Table Edge Carbide-Tipped 2 9/16" x 11/64" x1 3/32" R x 1/2" Shank 2-Flute w/Ball Bearing Guide
$130.61
Download as PDF
Thank you for shopping with us!
These special router bits are used for cutting tabletop edges or used with handrail side profile bits. Originally designed for easing and profiling the edges of tabletops, these bits also are widely used on handrails for the same purpose. (Refer to images for handrail patterns). With these bits, simultaneously eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail.
Thumbnail & Bead: Cuts the thumbnail arc coupled with a bead around the tabletop surface. With the optional 3/8" bearing, will produce a fillet at the cut's edge.
Warning: Maximum RPM = 16,000
These special router bits are used for cutting tabletop edges or used with handrail side profile bits. Originally designed for easing and profiling the edges of tabletops, these bits also are widely used on handrails for the same purpose. (Refer to images for handrail patterns). With these bits, simultaneously eliminate hard edges, reduce the visual thickness of a tabletop, and add an elegant detail.
Thumbnail & Bead: Cuts the thumbnail arc coupled with a bead around the tabletop surface. With the optional 3/8" bearing, will produce a fillet at the cut's edge.
Warning: Maximum RPM = 16,000
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| B1 | |
| Diameter | 2 9/16 in |
| Bearing(s) | Standard 1/2 in bearing 47706 included; Optional 3/8 in bearing 47702 order separately |
| Cut Height, Length, or Width | 3/4 in |
| Flute | 2 w/Bearing |
| Overall Length | |
| Radius | 11/64 in |
| R1/Radius | 1 3/32 in |
| Shank | 1/2 in |
| Type | Thumbnail & Bead |
| RPM | Warning: Maximum RPM = 16,000 |