Item # 45488, Amana Tool Carbide-Tipped Metric Straight Plunge for Undersized Plywood Dado 12mm x 1 1/4" x 1/2" Shank, 2-Flute
$26.14
Download as PDF
Thank you for shopping with us!
In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrades cut quality and leads to tool breakage.
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Many standard metric plunge bits from 3mm to 51mm are available on special order. Allow 2-3 weeks for delivery.
Actual plywood thickness of 12mm
In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrades cut quality and leads to tool breakage.
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Many standard metric plunge bits from 3mm to 51mm are available on special order. Allow 2-3 weeks for delivery.
Actual plywood thickness of 12mm
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Application | Ideal For: Undersized Plywood Dado |
| Diameter | 12 mm |
| Cut Height, Length, or Width | 1 1/4 in |
| Flute | 2 |
| Note | Actual plywood thickness of 12mm |
| Overall Length | 2 7/8 in |
| Shank | 1/2 in |