Item # 390-22, Amana Professional Quality Architectural Molding Router Bits w/Ball Bearing Guide
$45.64
Download as PDF
Thank you for shopping with us!
This bit is designed for routing architectural and furniture moldings and trim. The profile is laid out vertically, reducing the diameter of the bit. This bit should be used in a 2+ horsepower table-mounted router, and should be run at reduced speed. Although it has a ball bearing guide, guiding the cuts with the fence is recommended.
Use in a table-mounted router. Not for use in a handheld router!
1/2" Shank
2 Flute w/Ball Bearing Guide
Professional Quality Carbide-Tipped
This bit is designed for routing architectural and furniture moldings and trim. The profile is laid out vertically, reducing the diameter of the bit. This bit should be used in a 2+ horsepower table-mounted router, and should be run at reduced speed. Although it has a ball bearing guide, guiding the cuts with the fence is recommended.
Use in a table-mounted router. Not for use in a handheld router!
1/2" Shank
2 Flute w/Ball Bearing Guide
Professional Quality Carbide-Tipped
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 in |
| Bearing(s) | 47706, Amana Tool 3/16 ID x 1/2 OD x .195 Thick Steel Ball Bearing Guide |
| Cut Height, Length, or Width | 1 11/16 in |
| Flute | 2 |
| Overall Length | 3 1/4 in |
| Radius | 1/8 in |
| R1/Radius | 7/8 in |
| R2/Radius | 3/8 in |
| R3/Radius | N/A |
| RPM | 18,000 |
| Shank | 1/2 in |
