Item # 317018, Amana Tool Through-Hole Dowel Drill Solid Carbide 70MM Long
$36.02
Download as PDF Special solid carbide grade cutting flute for long lasting performance.
Industrial Through-Hole with V-Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life.
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling to create a cooler drilling area, no burning, and longer lasting cutting edge.
Not to be used in portable drills or handheld routers. Max RPM = 8,000
SPECIFICATIONS | |
Manufacturer | Amana Tool |
---|---|
Diameter | 8 mm |
Cut Height, Length, or Width | 40 mm |
Overall Length | 70 mm |
Rotation | Left |
Shank | 10 mm |