Freud Thin Stock Non-Ferrous Metal Blades: LU90M Series

Freud Thin Stock Non-Ferrous Metal Blades: LU90M Series

Thank you for shopping with us!

Application: Cuts Thin Aluminum & Other Non-Ferrous Metals

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass, and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with non-ferrous metals than with cutting wood. With this in mind, for this blade, Freud formulated a special carbide with high impact strength. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance. Freud-Made TiCo™ Carbide specifically designed to cut non-ferrous metals extends tooth life. Positive Hook Angle produces a smoother cut with less material distortion and burr-free cuts. Silver Ice™ Coating resists corrosion and pitch buildup.

Ideal For: Cutting Thin Aluminum & Other Non-Ferrous Metals. Wall thickness 1/8″ Max.

Tip: To determine if the metal you wish to cut is non-ferrous, hold the metal next to a magnet. If it attracts the magnet, it is a non-ferrous metal and should not be cut with a non-ferrous blade.