Amana Tool Instile™ & Rail System – Flat Panel Stile & Rail Sets w/Ball Bearing Guide 5/8″ to 1 1/8″ Material

Amana Tool Instile™ & Rail System - Flat Panel Stile & Rail Sets w/Ball Bearing Guide 5/8" to 1 1/8" Material

Thank you for shopping with us!

Instile™ System: Cut precise grooves to provide undersized plywood veneered panels with a snug, rattle-free fit. Adjust the panel groove width (3/16″ to 9/32″ for 1/4″ plywood; 7/16″ to 17/32″ for 1/2″ plywood). Cuts frame stock from 5/8″ through 1/ 1/4″ thick. Designed to cut precise grooves to provide undersized plywood veneered panels with a snug rattle-free fit. Each set includes 2 pieces (1 for stile cuts and 1 for rail cuts and shims).

Bits in these flat panel stile and rail sets have profile and groove or rabbet cutters and ball bearing guide mounted on a 1/2″ shank. Respacing of the components should only be necessary—using the provided shims—after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Image Right: “Thick” Configuration Assembly (7/16 to 17/32″ for 1/2″ plywood panel – 1 1/4″ doors)
Image Left: “Thin” Configuration Assembly (3/16″ to 9/32″ for 1/4″ plywood panel – 3/4″ doors)

Includes full color instruction manual.