Amana Tool Carbide Burr Bits for Die Grinders
Double Cut (DC) Benefits of the Double Cut (DC) flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank.
Non-Ferrous (NF) flutes are designed for cutting all non-ferrous and non-metallic workpieces such as aluminum, zinc, plastic, wood, etc. The uniquely aggressive cutting action provides little to no chance of plugging the flutes. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank.
Applications: To be used with air or electrically driven hand die-grinder with a typical collet mechanism or knee mill with an air-driven spindle speeder such as an Air Turbine product. Use of a quality spindle speeder may greatly improve performance of miniature tooling.
(Carbide brazed to steel shank.)
Warning: Not to be used in conventional routers.
Excellent for cutting:
-Aluminum
-Brass
-Bronze
-Copper
-Cast Iron
-Steel: 40-55rc
-Steel: 55-60rc
-Steel: Carbon
-Steel: Nickel
-Chrome
-Stainless Steel
-Steel Weldments
-Titanium
*Benefits of Zirconium Nitride (ZrN) Coating: Creates a harder and tougher cutting edge; allows for a prolonged cutting edge life and helps to prevent the buildup of material in the flutes while cutting. Has the tendency to run/spin much faster than an uncoated tool.
