Item # 54220, Amana Tool Architectural Molding Carbide-Tipped #4 1" D x 1/2" Shank 2-Flute w/Ball Bearing Guide
$62.48
Download as PDF
Thank you for shopping with us!
Amana Tool Architectural Molding Carbide-Tipped #4 1" D x 1/2" Shank 2-Flute w/Ball Bearing Guide
These bits are designed for routing architectural and furniture moldings and trim. Almost all have the profile laid out vertically, reducing the diameter of the bit. These bits should be used in a 2+ horsepower, table-mounted router, and many should be run at reduced speed. Although most have ball bearing guides, guiding the cuts with the fence is recommended.
Warning: Maximum RPM = 12,000
Amana Tool Architectural Molding Carbide-Tipped #4 1" D x 1/2" Shank 2-Flute w/Ball Bearing Guide
These bits are designed for routing architectural and furniture moldings and trim. Almost all have the profile laid out vertically, reducing the diameter of the bit. These bits should be used in a 2+ horsepower, table-mounted router, and many should be run at reduced speed. Although most have ball bearing guides, guiding the cuts with the fence is recommended.
Warning: Maximum RPM = 12,000
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 in |
| Cut Height, Length, or Width | 1 11/16 in |
| Bearing(s) | 47706 |
| Diameter (D1) | 1 in |
| Flute | 2 w/Bearing |
| Note | Warning: Maximum RPM = 12,000 |
| Overall Length | 3 1/4 in |
| Radius | 1/8 in |
| R1/Large Radius | 7/8 in |
| R2/Small Radius | 3/8 in |
| Radius (R3) | -- |
| Shank | 1/2 in |
| Type | #4 |