Item # ASNF128058, Everlast Astra Series 12" Dia 80-Tooth 5/8" Bore 0.095" Plate 0.115" Kerf Mitre Saw - Non Ferrous
$275.16
Download as PDF
Thank you for shopping with us!
For the smoothest cutting of wood or aluminum mouldings. Extra stiff plates and special clearances provide extremely accurate cuts on double mitre machines such as Pistorius, Sampson, CTD, etc. Extra hard MICRO -5 tips used. MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide. Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting
For the smoothest cutting of wood or aluminum mouldings. Extra stiff plates and special clearances provide extremely accurate cuts on double mitre machines such as Pistorius, Sampson, CTD, etc. Extra hard MICRO -5 tips used. MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide. Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 12 in |
| Bore | 5/8 in |
| Grind | TCG |
| Kerf | 0.115 in (2.9 mm) |
| Plate | 0.095 in - 2.4 mm |
| Teeth | 80 |