Item # 45582, Amana Tool Carbide-Tipped Downshear Design Mortising 1/2" Dia x 3/4" x 1/4" Shank with Upper BB
$31.80
Download as PDF
Thank you for shopping with us!
There is no faster method for producing multiple mortises than with a template. And the accuracy achieved with a template is unparallel. These mortise bits are specially designed for use with templates, both linear and curved.
If you've ever used a bushing with template work then you'll appreciate these bearing-guided bits; there's no need to calculate offset—ever. Instead, the mortise is sized exactly to the template. And, unlike a bushing on the router sub-base, the guide bearing is always concentric to the cutting circle of the bit. This ensures precise cuts every time.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
There is no faster method for producing multiple mortises than with a template. And the accuracy achieved with a template is unparallel. These mortise bits are specially designed for use with templates, both linear and curved.
If you've ever used a bushing with template work then you'll appreciate these bearing-guided bits; there's no need to calculate offset—ever. Instead, the mortise is sized exactly to the template. And, unlike a bushing on the router sub-base, the guide bearing is always concentric to the cutting circle of the bit. This ensures precise cuts every time.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1/2 in |
| Cut Height, Length, or Width | 3/4 in |
| Flute Geometry | Downcut |
| Flute | 2 |
| Overall Length | 2 3/8 in |
| Shank | 1/4 in |