Item # 49523, Amana Tool Corner Rounding Carbide-Tipped 2-Flute w/Ball Bearing Guide
$128.14
Download as PDF
Thank you for shopping with us!
A basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as part of a complex one. Also known as a roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
Warning: Maximum RPM = 16,000. Use in a table-mounted router—not for use in a handheld router!
Not guaranteed due to extreme diameter and radius. For best results, it is recommended to use a small radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.
A basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as part of a complex one. Also known as a roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
Warning: Maximum RPM = 16,000. Use in a table-mounted router—not for use in a handheld router!
Not guaranteed due to extreme diameter and radius. For best results, it is recommended to use a small radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 2 3/4 in |
| Cut Height, Length, or Width | 1 3/8 in |
| Diameter (D1) | 0.5 in |
| Bearing(s) | 47706 |
| Flute | 2 w/Bearing |
| Knives | -- |
| Note | Use in a table-mounted router; not for use in a handheld router! Not guaranteed due to extreme diameter & radius. Recommend using smaller radius bit or chamfer the material prior to using these large radius tools. |
| Overall Length | 3 1/4 in |
| Radius | 1 1/8 in |
| Shank | 1/2 in |
| RPM | Warning: Maximum RPM = 16,000 |