Item # 45566, Amana Tool Mortising Carbide Tipped Bottom Cleaning / Spoilboard 1 1/2" Dia x 5/8 x 1/2" Shank Upshear Design
$61.01
Download as PDF
Thank you for shopping with us!
This bit is intended for broad, very shallow cuts where an exceptional finish is desired. Use it to clean up previously cut dadoes and grooves, or for surfacing cuts. The up-shear configuration improves chip removal, while the cutting edge orientation produces a smooth surface.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
This bit is intended for broad, very shallow cuts where an exceptional finish is desired. Use it to clean up previously cut dadoes and grooves, or for surfacing cuts. The up-shear configuration improves chip removal, while the cutting edge orientation produces a smooth surface.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 1/2 in |
| Cut Height, Length, or Width | 5/8 in |
| Flute Geometry | Upcut |
| Flute | 2 |
| Overall Length | 2 3/4 in |
| Shank | 1/2 in |