Item # BURS-098, Amana Tool Solid Carbide Cylindrical Shape, No End Cut 1/8" D x 9/16" CH x 1/8" Shank Double Cut SA Burr Bit for Die-Grinders
$6.00
Download as PDF
Thank you for shopping with us!
Double Cut (DC) Benefits of the Double Cut (DC) flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank.
Applications: To be used with air or electrically driven hand die-grinder with a typical collet mechanism or knee mill with an air-driven spindle speeder such as an Air Turbine product. Use of a quality spindle speeder may greatly improve performance of miniature tooling.
(Carbide brazed to steel shank.)
Warning: Not to be used in conventional routers.
Excellent for cutting:
-Aluminum
-Brass
-Bronze
-Copper
-Cast Iron
-Steel: 40-55rc
-Steel: 55-60rc
-Steel: Carbon
-Steel: Nickel
-Chrome
-Stainless Steel
-Steel Weldments
-Titanium
Double Cut (DC) Benefits of the Double Cut (DC) flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank.
Applications: To be used with air or electrically driven hand die-grinder with a typical collet mechanism or knee mill with an air-driven spindle speeder such as an Air Turbine product. Use of a quality spindle speeder may greatly improve performance of miniature tooling.
(Carbide brazed to steel shank.)
Warning: Not to be used in conventional routers.
Excellent for cutting:
-Aluminum
-Brass
-Bronze
-Copper
-Cast Iron
-Steel: 40-55rc
-Steel: 55-60rc
-Steel: Carbon
-Steel: Nickel
-Chrome
-Stainless Steel
-Steel Weldments
-Titanium
SPECIFICATIONS | |
Manufacturer | Amana Tool |
---|---|
Diameter | 1/8 in |
Cut Height, Length, or Width | 9/16 in |
Note | Warning: Not to be used in conventional routers. |
Overall Length | 1 1/2 in |
Shank | 1/8 in |
Style | DC Ref #SA-43DC |
Type | Double Cut/Solid Carbide |
You may also like…
-
Item #BURS-088NF, Amana Tool Cylindrical Shape with End Cut 1/2″ D x 1″ CH x 1/4″ Shank Non-Ferrous ZRN Coated SB Burr Bit for Die-Grinders
$43.24
-
Item #BURS-144, Amana Tool Tree Shape 1/2" D x 1" CH x 1/4" Shank Double Cut SF Burr Bit for Die-Grinders
$24.60
-
Item #BURS-160, Amana Tool Ball Shape 1/2" D x 7/16" CH x 1/4" Shank Double Cut SD Burr Bit for Die-Grinders – 6 1/2" Long
$28.54