Item # 45504, Amana Tool Carbide-Tipped Mortising 3/4" Dia x 3/4" x 1/4" Shank
$23.59
Download as PDF
Thank you for shopping with us!
Cutting mortises for hinges and locks can be challenging: the mortise depth must be accurate for smooth operation and the edges must be sharp for a clean, professional installation. These mortise bits make hardware installation a snap. The large gullet (see images) between the two flutes quickly clears chips away and the cutter geometry creates a crisp outline for a perfect fit.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
Cutting mortises for hinges and locks can be challenging: the mortise depth must be accurate for smooth operation and the edges must be sharp for a clean, professional installation. These mortise bits make hardware installation a snap. The large gullet (see images) between the two flutes quickly clears chips away and the cutter geometry creates a crisp outline for a perfect fit.
Note: A proper mortising bit should have a large gullet (as shown in the image below) between the two flutes. This allows greater chip clearance and removal.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 3/4 in |
| Cut Height, Length, or Width | 3/4 in |
| Flute | 2 |
| Overall Length | 2 in |
| Shank | 1/4 in |