Item # DFL1210305, Everlast 12" Dia 100-Tooth 1" Bore .095" /2.4mm Plate 0.125" /3.2mm Kerf MICRO-5 Double Face Laminate Saw - 30º ATB
$259.43
Download as PDF
Thank you for shopping with us!
The perfect saw for cutting double-sided materials such as Melamine, Kortron, and Veneer. Can be used on radial or table saws.
High Alternate Top Bevel - Hi ATB - Identical configuration to ATB, but each tooth has top bevel of 30 degrees or more. The greater angle can cause faster wearing/dulling. Combine with Micro-5 carbide to increase time between sharpenings. Ideal for cutting of laminated materials. Provides a fine cutting finish with proper sharpening. An Alternate Face Bevel (AFB) can be added to this design upon request.
MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide.
The perfect saw for cutting double-sided materials such as Melamine, Kortron, and Veneer. Can be used on radial or table saws.
High Alternate Top Bevel - Hi ATB - Identical configuration to ATB, but each tooth has top bevel of 30 degrees or more. The greater angle can cause faster wearing/dulling. Combine with Micro-5 carbide to increase time between sharpenings. Ideal for cutting of laminated materials. Provides a fine cutting finish with proper sharpening. An Alternate Face Bevel (AFB) can be added to this design upon request.
MICRO-5 extra hard tips provide 3 to 5 times longer service than standard carbide.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1 in |
| Diameter | 12 in |
| Grind | 30 deg ATB |
| Hook Angle | -5 deg |
| Kerf | 0.125 in |
| Plate | 0.095 in |
| Teeth | 100 |
| Pinholes | -- |