Item # RC-1126, Amana Tool Carbide-Tipped CNC Ball End Insert 1/2" Radius x 1" Dia x 1/2" x 1/2" Shank 2-Flute
$77.85
Download as PDF
Thank you for shopping with us!
Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the D1 dimension of the ball end bit.
Max RPM 18,000
Warning: These tools have an open flute design (not anti-kickback) and are intended for high feed rate CNC machine use only. Do not use in portable routers!
Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the D1 dimension of the ball end bit.
Max RPM 18,000
Warning: These tools have an open flute design (not anti-kickback) and are intended for high feed rate CNC machine use only. Do not use in portable routers!
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 in |
| Cut Height, Length, or Width | 15/16 in |
| Replacement Parts | Screw #67115 |
| Flute | 2 |
| Knives | RCK-54 |
| Overall Length | 2 7/8 in |
| Radius | 1/2 in |
| RPM | 18,000 |
| Shank | 1/2 in |
| Note | Profile is useful as a conduit in for cables, pipes, etc. Warning: Max RPM = 18,000 |
