Item # TCK1640T25, Everlast Truss & Component Saw - 16" Dia 40-Tooth 1.26" Bore 0.150" Plate 0.190" Kerf
$320.88
Download as PDF
Thank you for shopping with us!
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1.26 in |
| Diameter | 16 in |
| Countersink | 2.25"; 2.265" Bolt Hole Circle Dia |
| Kerf | 0.190 in - 4.8 mm |
| Machine | Koskovich |
| Grind | TCG |
| Plate | 0.150 in - 3.8 mm |
| Teeth | 40 |
| Hole Size | |