Item # TC1660T, Everlast Truss & Component Saw - 16" Dia 60-Tooth 1" Bore 0.134" Plate 0.185" Kerf
$295.42
Download as PDF
Thank you for shopping with us!
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
These saws are the workhorses of truss plants and are designed to provide a long service life and excellent cutting performance. Countersunk (80°) holes will accept 5/16" flat head bolt.
Triple Chip Grind - TCG - This design uses a trapezoidal tooth with 45 deg bevel on each side, which performs the cutting work followed by a lower STR tooth (raker) tooth for clean-out. Strong tooth design for cutting harder materials such as manmade laminates (single-sided) and non-ferrous materials. Can be used for rip cutting and cross cutting.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Bore | 1 in |
| Diameter | 16 in |
| Countersink | 3-Left; 3-Right |
| Kerf | 0.185 in - 4.7 mm |
| Machine | Clary |
| Grind | TCG |
| Plate | 0.134 in - 3.4 mm |
| Teeth | 60 |
| Hole Size | 3.125 in Bolt Hole Circle Dia |