Item # MT1080M, Everlast 10" Dia 80-Tooth 5/8" Bore 0.072" Plate 0.102" Kerf Mitre Saw - AR - Thin Kerf
$148.80
Download as PDF
Thank you for shopping with us!
Especially designed for cutting wood mouldings on all types of mitre machines and Rockwell type mitre box saws. Negative tooth design provides the least possible grabbing of material.
Alternate with Raker - AR - Similar configuration to ATB, but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
Especially designed for cutting wood mouldings on all types of mitre machines and Rockwell type mitre box saws. Negative tooth design provides the least possible grabbing of material.
Alternate with Raker - AR - Similar configuration to ATB, but every fifth tooth is a raker, which assists in reducing cutting pressure and material tearing during cutting. Can be used for rip cutting and cross cutting in a variety of hard woods, soft woods, plywood, and chipboard. This tooth configuration can be produced in a 2+1 or 3+1 design upon request.
| SPECIFICATIONS | |
| Manufacturer | Everlast |
|---|---|
| Diameter | 10 in |
| Bore | 5/8 in |
| Grind | AR |
| Kerf | 0.102 in |
| Note | Thin kerf for Makita, Ryobi, Craftsman, Dewalt & Hitachi |
| Plate | 0.072 in |
| Teeth | 80 |
| Hook Angle | 0 deg |