Item # 51572, Amana Tool Carbide-Tipped Bullnose 3/8" Radius x 1 3/8" Dia x 1 5/16" x 1/2" Shank 2 Flute w/ Ball Bearing Guide
$93.30
Download as PDF
Thank you for shopping with us!
Amana Tool Carbide-Tipped Bullnose 3/8" Radius x 1 3/8" Dia x 1 5/16" x 1/2" Shank 2 Flute w/ Ball Bearing Guide
Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and to make moldings. The “nose diameter” (material thickness) is the thickness of stock that can be nosed, i.e., given a full 180° roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table.
Warning: Maximum RPM: 20,000.
Amana Tool Carbide-Tipped Bullnose 3/8" Radius x 1 3/8" Dia x 1 5/16" x 1/2" Shank 2 Flute w/ Ball Bearing Guide
Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and to make moldings. The “nose diameter” (material thickness) is the thickness of stock that can be nosed, i.e., given a full 180° roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table.
Warning: Maximum RPM: 20,000.
| SPECIFICATIONS | |
| Manufacturer | Amana Tool |
|---|---|
| Diameter | 1 3/8 in |
| Cut Height, Length, or Width | 1 5/16 in |
| Bearing(s) | 47716, Amana Tool Metric 5mm ID x 16mm OD x 5mm Thick Steel Ball Bearing Guide |
| Flute | 2 w/Bearing |
| Material Thickness | 3/4 in |
| Note | Material Thickness denotes thickness of material on which a full 180 deg roundover can be accomplished. Use in a table-mounted router; not for use in a handheld router! |
| Overall Length | 3 1/4 in |
| Radius | 3/8 in |
| Shank | 1/2 in |
| RPM | Warning: Maximum RPM: 20,000 |
